HQ-STYLE-000038QA passed with warnings

Haircut · Wolf cut

Modern Wolf Cut with Shaggy Layers and Split Fringe

A collarbone-length wolf cut with a short rounded crown, disconnected shag layers, a cheekbone split fringe, and an elongated airy nape.

Book this style Check it against my hair

Available as a mobile service at homes, offices, and hotels across Greater Montréal.

Three-quarter view of a modern wolf cut showing its short crown and elongated nape — Reference angle explorer
Drag or swipe · horizontal scroll or Shift + wheel · arrow keys
2 / 4
Fashion white · target #F2F0EA
Current documented coverage: four verified angles from 0° to 180°. A continuous 360° turntable publishes only after 24–36 consistent frames pass registry QA.
Showing three-quarter view at 20°.

Required registry views

One cut. Four viewpoints.

A single portrait can hide the taper, fade height, crown, weight line, or neckline. Every published Hairqut record must show the construction from the front, three-quarter, side, and rear. The recorded fashion white backdrop keeps the silhouette readable while preserving fine strand detail.

Front view of a modern wolf cut with split fringe and shaggy collarbone layers — Front0°
Documents the split fringe, face frame, crown width, and balanced broken ends.

Side90°

Exposes the rounded crown, disconnected side layers, ear contour, and nape profile.

Rear view of a modern wolf cut showing broken layers and a soft collarbone perimeter — Rear180°
Documents crown-to-nape continuity, broken layering, symmetry, and the elongated rear outline.

Hairqut Style Blueprint · Cut geometry

A visual brief your professional can use.

The registered views establish the reference. This blueprint pins the most important construction decisions directly to those source views, then makes adaptation, maintenance, and the chair-side conversation clear.

Verified-angle cut map

Approved-view modern wolf cut map

The approved front, side, and rear registry views are annotated only where the split fringe, cheekbone face frame, rounded crown, disconnected side layers, crown-to-nape flow, and airy collarbone perimeter are visible. The diagram does not invent hidden sectioning, exact elevation angles, subsection sizes, or texturizing depth.

3 publication views · 6 callouts

Annotated front construction map for Modern Wolf Cut. Front view of a modern wolf cut with split fringe and shaggy collarbone layers — Split fringe and face frame
The front view establishes the near-centre split, wispy cheekbone fringe, and broken face-framing ends.
01
Split fringe
Wispy front pieces separate near the centre rather than forming a heavy blunt fringe
02
Cheekbone face frame
The shortest visible side pieces finish around the cheekbones and move into longer shag layers

Side90°

Approved publication view

Rounded crown and disconnection

The profile records compact crown lift above progressively longer side and nape pieces.

Rounded crown

Shorter visible layers create compact lift through the upper silhouette

Disconnected shag layers

Broken side lengths step past the ear instead of forming a smooth bob graduation

Annotated rear construction map for Modern Wolf Cut. Rear view of a modern wolf cut showing broken layers and a soft collarbone perimeter — Crown-to-nape flow and perimeter
The rear view records layered continuity into an elongated soft nape and irregular collarbone outline.
01
Crown-to-nape flow
Visible broken layers travel from the fuller crown into longer rear lengths
02
Airy collarbone perimeter
The longest rear ends remain soft and irregular without an extreme narrow tail

Pins locate the reference evidence; the numbered notes make the request legible in the chair. This is an original Hairqut communication diagram, not a universal service prescription.

Provenance: The diagram uses the locked approved publication views, which mirror the formal evidence package byte-for-byte. The overlays are deterministic HTML and SVG; a separate AI-generated diagram experiment remains internal and is not used on this page.

Reference result

A collarbone wolf cut with compact crown lift, cheekbone split fringe, disconnected shag layers, and an elongated airy nape.

Starting-state gate

Current length, density, texture, shrinkage, condition, existing layers, and fringe history determine whether this crown-to-nape contrast can be achieved safely. A professional must assess them first.

Finish-dependent texture

The visible separation and lift are finished results. Air-dried shape, volume, and piece definition will vary with the starting hair and routine.

Full specification · evidence graded

What is known, what must be assessed.

Every field is marked by its evidence boundary. “Unknown” is intentional: the registry never invents hidden technique, anatomy, timing, or price.

Construction

Technical specification

Overall length: Collarbone length in the registered result.; Recorded
Crown: Shorter rounded layers create compact visible lift through the upper silhouette.; Visible
Fringe: Wispy cheekbone-length pieces split near the centre.; Visible
Side construction: Progressively longer broken layers frame the cheek and ear without a smooth bob graduation.; Visible
Nape: Elongated soft length reaches the collarbone without a narrow extreme tail.; Visible
Perimeter: The outline is airy and irregular rather than blunt or uniformly solid.; Visible
Direction: Finished pieces move outward and downward through the sides and nape, with compact lift at the crown.; Visible
Weight line: No continuous blunt weight line is visible; the silhouette relies on broken separation.; Visible
Elevation: Controlled elevation is recorded, but an exact degree is not specified.; Unknown
Sectioning: Hidden section pattern, subsection sizes, and exact disconnection boundaries are not established by the approved views.; Unknown
Guards, fade, taper: Not part of this collarbone layered reference.; N/A
Neckline: The hair falls over the neckline; no separate neckline finish is specified.; N/A

Adaptation

Hair and suitability

Reference texture: Dense 2B in the registered result; this is a visual reference, not a suitability limit.; Recorded
Density: Assess how much crown shortening and side disconnection can be supported without exposing thin areas or weakening the nape.; Assess
Porosity: Not recorded; assess before selecting products or heat strategy.; Assess
Shrinkage: Not established by the finished views; assess before setting fringe, crown, and perimeter lengths.; Assess
Condition: Assess fragility, previous chemical services, heat history, and current ends before adding disconnection or texture.; Assess
Face shape: No universal face-shape claim is supported; personalize fringe and face-frame placement to the person and goal.; Assess
Starting length: Enough length is required to retain the requested nape and collarbone perimeter after crown and side layers are established.; Assess
Finish dependence: Visible crown lift and piece separation depend on styling and may not air-dry as shown.; Recorded

Service handoff

Booking service: womens_haircut
Appointment duration: Not specified in canonical evidence; confirm during booking or consultation.
Price: Not stored in this style record; the current booking service controls price.

Professional requirements

Skills

Personalizing short crown geometry while preserving density
Creating controlled side disconnection without drifting into a smooth bob or extreme mullet tail
Placing a split fringe and face frame from the assessed starting state
Condition-led point cutting and texturizing without producing ragged or over-thinned ends

Tools and product categories

Professional cutting shears and point-cutting technique recorded in the canonical brief
Texturizing method selected only after density and condition assessment
Diffuser or low-tension shaping tool appropriate to the current texture
Light texture or flexible finishing category without a brand requirement

Safety and starting state

Confirm before service

Current crown, fringe, side, nape, and perimeter lengths
Density, texture, shrinkage, condition, existing layers, and growth patterns
Previous chemical services, heat exposure, and current breakage
Daily styling tolerance and preferred maintenance cadence

Do not promise unchanged

Do not promise the registered crown-to-nape contrast when there is insufficient starting length.
Do not create aggressive disconnection or internal texture when the starting density or condition cannot support the broken perimeter.
Do not promise the finished lift and separation without discussing the styling needed to create them.
Do not prescribe a heat setting, texturizing depth, or product formula without assessing condition and service history.

Evidence and governance

Source package: os/hairqut-styles/registry/entries/HQ-STYLE-000038-modern-wolf-cut

Asset relationship: All four approved publication images mirror the formal package byte-for-byte.

Generated media: The approved style views depict a fictional AI-generated subject; the underlying generation model and request ids are unavailable. The on-page diagram is a deterministic overlay on those locked views.

Privacy: No real customer photo, identity, or biometric record is used in this Blueprint.

Booking handoff: The Blueprint links to the existing womens_haircut service; duration, price, and availability come from the current booking flow.

Freshness

Asset quality and provenance package assessed 2026-08-01.
Blueprint geometry and full specification reviewed 2026-09-12.

Consultation

Confirm disconnection, retained nape, and fringe commitment

Agree on the shortest fringe point and minimum retained nape length before cutting.
Ask the professional to assess density, texture, shrinkage, condition, existing layers, and chemical or heat history before choosing sectioning or elevation.
Confirm how visibly disconnected the side layers should be; the reference is intentionally broken rather than smoothly graduated.
Discuss realistic daily styling and how much crown lift or piece separation is expected without heat.

Care plan

Keep the intent, not a fixed schedule.

1
On styling days
Support crown lift and separation
Use the agreed low-tension air-dry, diffuser, or finishing method and appropriate heat protection when heat is used.
2
As the fringe grows
Reassess the split fringe
Refresh timing depends on growth, preferred cheekbone placement, and whether the fringe still separates as intended.
3
Typically 6–10 weeks
Rebalance crown and nape contrast
The recorded range is a planning reference, not a promise; growth, condition, fringe behaviour, and preferred softness determine the actual cadence.

Home kit

Product categories, not product pressure.

Protect

Heat protection suited to the current hair

Confirm the formula and temperature plan with the professional before thermal styling.

Shape

Diffuser or low-tension styling tool

Use the agreed method to support natural movement and crown lift without forcing a rigid finish.

Separate

Light texture or flexible finishing category

Use sparingly to show broken ends without creating stiffness or heavy buildup.

These are product and tool categories, not paid placements or a substitute for professional assessment. No affiliate links, brand claims, fixed heat settings, or guaranteed air-dry result are present.

Professional brief

Hand this evidence-bound brief to your professional

Use the four approved registry views and the visible construction map to align on the result, then let the professional determine safe sectioning, elevation, texturizing, and achievable crown-to-nape contrast from the current starting state.

The four approved registry views
The agreed shortest fringe point and minimum retained nape length
Compact rounded crown lift without collapsing density
Intentionally disconnected side layers rather than smooth bob graduation
An elongated soft nape with an airy collarbone perimeter
A texture, density, shrinkage, condition, service-history, and styling assessment

Book with this Blueprint

Blueprint v1.2 · reviewed September 12, 2026. Every diagram pin and technical field was checked against the approved front, side, or rear publication view, the locked canonical record, and the formal evidence package. Hidden sectioning, exact elevation degrees, texturizing depth, porosity, timing, price, and unrecorded generation details were left unknown or assessment-required rather than inferred.

Canonical reference data

The source record behind the Blueprint.

These are the canonical attributes of the illustrated record. The Blueprint above translates them for a consultation; this section keeps the technical source explicit.

Length: Collarbone
Reference texture: Dense 2B
Fringe: Cheekbone-length split fringe
Silhouette: Rounded crown, elongated nape

Cut construction

Crown: Short rounded layers create compact lift and movement.
Fringe: Split near the center with wispy cheekbone-length pieces.
Sides: Progressively longer disconnected shag layers frame the cheeks and ears.
Nape: Soft elongated length reaches the collarbone without an extreme mullet tail.
Perimeter: Airy, irregular ends maintain the intentionally broken silhouette.

Quality assessment

Visible, not implied.

95/ 100

Publication threshold: 85. Assessed August 1, 2026.

Identity consistency93

Haircut geometry95

View compliance99

Hair realism94

Anatomy realism95

Photography consistency94

Provenance completeness95

Why this record passed with warnings

The rear crown reads marginally fuller than the three-quarter master but preserves the same wolf-cut construction.
OpenAI built-in image generation was used; the underlying model identifier is not exposed by this surface.
AI-derived viewpoints are internally consistent illustrations, not proof that one physical subject was photographed continuously from four angles.

Registry provenance

100% AI-generated from scratch.

The four images are an intentionally matched fictional reference set made specifically for this Hairqut record. Fictional person; no real person or celebrity was used as a reference. The set passed deterministic asset checks and a separate visual consistency assessment.

Generated media record: OpenAI built-in image generation via ChatGPT. underlying model identifier not exposed.

Get this style in Montréal Browse registry